水稻秧盘育秧制浆刀片匀浆过程分析及其优化设计

针对现阶段水稻秧盘育秧技术中制匀泥浆效率低下的问题,采用正交设计方法、计算流体动力学数值模拟和试验分析,对不同参数刀片在水田中匀浆作业时的匀浆效果和功率损耗进行研究。结果表明:1)单刀切削幅宽为影响泥浆运动速度和功率损耗的最大因素,折弯角影响不明显;2)当刀片滑切角为50°,折弯角为115°,单刀切削幅宽为60 mm时,刀片匀浆效果好;当滑切角为30°,折弯角为135°,单刀切削幅宽为20 mm时,功率损耗小;3)刀片中心面处和刀片折弯侧0.1 m处刀片打匀泥浆效果良好;4)功率损耗仿真值与试验值平均相对误差为12.16%,在可接受范围内。     

大型薄壳制件真空辅助树脂传递模塑工艺充模方案仿真分析及优化

针对大型树脂基复合材料制件不适于用实验试错法进行充模方案设计的问题,在分析树脂流动规律的基础上将大型薄壳件的求解区域分解,仿真分析了不同充模方案下树脂在纤维中的流动行为和模腔内压力变化,提出在制件填充面积等分处设置流道的方法,选择和优化大型薄壳制件的充模方案。结果表明:①对于不便进行实验试错法进行真空辅助树脂传递模塑(VARTM)工艺充模方案设计的大型薄壳制件,可以采用数值模拟的方式,以达西定律、能量守恒定律等为计算依据,求解压力场和速度场,对比不同仿真方案的充模时间等数据合理安排注胶方式方法,指导VARTM工艺制备大型复合材料制件合理安排注胶方式,提高生产率、减少因树脂浸润不均匀产生的缺陷。②对于大型薄壳类制件,忽略厚度方向尺寸,影响充模时间的主要因素为流道长度和树脂流动距离。选取尽可能长的注胶流道,合理设置流道位置以减少树脂流动的距离;长流道可以增加树脂瞬时注入量、提高较长时间的压力差;而树脂流程越长,树脂前锋处压力损失越大,流速越慢。③试验提出了制件填充面积等分处设置流道的方法。将大型薄壳工艺制件充模面积等分,注胶流道布置在垂直于制件长度方向的面积等分线上,可缩短充模时间并减少制件两端的树脂富集现象。对于较狭长部分可再次进行面积等分设置流道,以免造成树脂流程过长压力流失过多;而对于较宽阔部分不宜设置过多流道以免树脂前锋稳定前互相接触造成制件充模不均匀。     

大载荷无人直升机静电喷雾沉积特性试验研究

为探索在大载荷植保无人直升机下洗气流作用下各因素对静电喷雾沉积特性的影响规律,将正交试验与Box-Behnken响应面试验相结合,在定性分析的基础上,建立起沉积特性参数与荷电电压、飞行参数等影响因素之间的数学预测模型,定量地分析了各因素对沉积特性的影响.结果表明:大载荷无人直升机静电喷雾沉积特性受施药过程中荷电电压和飞行参数的影响显著.雾滴单位面积沉积量与荷电电压成正相关,与飞行速度、飞行高度成负相关.相同飞行参数下(飞行速度5m/s、飞行高度4m),荷电电压8kV的静电喷雾单位面积沉积量为0.3180μL/cm²,比非静电喷雾单位面积沉积量提高了1.17倍.与此同时,沉积量变异系数与飞行速度成正相关,与荷电电压、飞行高度成负相关,即增加荷电电压、降低飞行速度或者提高飞行高度能有效改善雾滴的沉积均匀性.     

Relationships between body size and secondary sexual characters,and sperm characters in male Dolly Varden char (Salvelinus malma)

In Salmonidae, subordinate males are exposed to higher risks of sperm competition than dominant males and thus are expected to improve the sperm characteristics (sperm concentrations, sperm velocity and sperm longevity). In this study, we investigated the relationships between body size and secondary sexual characters (breeding colour, hump height and snout length), and sperm characteristics of one‐year‐old (newly matured) Dolly Varden char. Small males displayed higher sperm concentrations than large males. Moreover, males with dull breeding colours, but not with lesser snout length and hump height, displayed an increased sperm velocity compared to males with bright colours, suggesting a trade‐off between sperm quantity and the investment in breeding colour. In addition, sperm longevity decreased as sperm swimming velocity increased. These findings indicate that small males with dull breeding colours improve the quantity and quality of their sperm to a great extent to enhance their chances of reproductive success.     

不同叶顶间隙下斜流泵内部 流动特性的数值模拟

为研究轮缘叶顶间隙对斜流泵性能和流动不稳定特性的影响,基于SST k-ω湍流模型对某斜流泵选取了0, 0.25, 1.00, 2.00 mm 4种尺寸的叶顶间隙进行数值计算,分析间隙区域内压差分布、泄漏量、叶顶泄漏涡旋强度以及进口轴面速度分布.结果表明:不同运行工况下,斜流泵泄漏量从叶轮进口到叶轮出口先增大后减小,其与间隙区内压差变化趋势相吻合.叶顶泄漏量随着间隙尺寸的增大而增大,导致泵的能量损失增大.经对比发现,间隙尺寸是影响叶顶泄漏量的主要因素.小流量工况下,随着叶顶间隙尺寸的增大,叶顶泄漏流与主流卷吸作用形成的泄漏涡强度逐渐增强.部分泄漏流进入相邻叶片通道,导致其流动失稳.随着叶顶间隙的增大,斜流泵能量损失明显增多,且内流不稳定性明显加剧.增大流量后,不同间隙下叶顶泄漏涡旋转强度均逐渐降低.     

野生老芒麦种质资源鉴定与基部叶鞘绒毛变异分析

为更好地利用老芒麦(Elymus sibiricus L.)野生资源,本研究从我国青藏高原、西北、华北、东北地区以及国外部分地区共采集了1 723份野生披碱草属种质资源,通过表型特征观测和流式细胞仪检测,共鉴定出了990份野生老芒麦种质,246份垂穗披碱草种质,并测得老芒麦的DNA含量在5.86～7.30 Gb之间,平均DNA含量为6.66 Gb;垂穗披碱草材料的DNA含量在9.50～10.36 Gb之间,平均DNA含量为9.97 Gb。研究结果显示,在西北、华北以及东北地区的部分野生老芒麦材料在苗期基部叶鞘出现了绒毛,分析发现该表型出现的概率与经度和纬度呈极显著正相关关系(P<0.01),与海拔、年年均气温以及年平均降雨量呈极显著负相关关系(P<0.01)。表明老芒麦苗期基部叶鞘绒毛的有无与环境因子之间存在着必然的联系,可能是老芒麦种质应对不同环境类型的适应性机制之一。本研究为老芒麦的形态鉴定提供了新的依据,为老芒麦种质资源挖掘和育种应用提供了材料基础。     

Reinvestigation of the scaling law of the windblown sand launch velocity with a wind tunnel experiment

Windblown sand transport is a leading factor in the geophysical evolution of arid and semi-arid regions. The evolution speed is usually indicated by the sand transport rate that is a function of launch velocity of sand particle, whichhasbeen investigated by the experimental measurement and numerical simulation. However, the obtained results in literatures are inconsistent. Some researchers have discovered a relation between average launch velocity and wind shear velocity, while some other researchers have suggested that average launch velocity is independent of wind shear velocity. The inconsistence of launch velocity leads to a controversy in the scaling law of the sand transport rate in the windblown case. On the contrary, in subaqueous case, the scaling law of the sand transport rate has been widely accepted as a cubic function of fluid shear velocity. In order to explain the debates surrounding the windblown case and the difference between windblown and subaquatic cases, this study reinvestigates the scaling law of the vertical launch velocity of windblown transported sand particles by using a dimensional analysis in consideration of the compatibility of the characteristic time of sand particle motion and that of air flow. Then a wind tunnel experiment is conducted to confirm the revisited scaling law, where the sand particle motion pictures are recorded by a high-speed camera and then the launch velocity is solved by the particle tracking velocimetry. By incorporating the results of dimensional analysis and wind tunnel experiment, it can be concluded that, the ratio of saltonsnumber to reptonsnumberdetermines the scaling law of sand particle launch velocity and that of sand transport rate, and using this ratio is able to explain the discrepancies among the classical models of steady sand transport. Moreover, the resulting scaling law can explain the sand sieving phenomenon: a greater fraction of large grains is observed as the distance to the wind tunnel entrance becomes larger.     

Influence of salinity and moisture on the threshold shear velocity of saline sand in the Qarhan Desert,Qaidam Basin of China: A wind tunnel experiment

Determination of the threshold shear velocity is essential for predicting sand transport, dust release and desertification. In this study, a wind tunnel experiment was conducted to evaluate the influence of salinity and moisture on the threshold shear velocity of saline sand. Saline sand samples (mean particle size of 164.50-186.08 μm and the total silt, clay and salt content of 0.80%-8.25%) were collected from three saline sand dunes (one barchan dune and two linear dunes) in the Qarhan Desert, Qaidam Basin of China. Original saline sand samples were placed in two experimental trays for wet and dry processing to simulate deliquescence and desiccation, respectively. Surface moisture content ranging from 0.30% to 1.90% was generated by the steam method so that the saline sand can absorb water in a saturated water vapor environment. The motion of sand particles was determined by the observers with a solid laser. The laser sheet (0.80 cm thick), which was emitted by the solid laser, horizontally covered the sand surface and was bound to the sand. Results show that the cohesion of saline sand results from a combination of salt and water. The threshold shear velocity increases exponentially with the increase in crust thickness for the linear sand dunes. There is a positive linear correlation between the original moisture content and relative threshold shear velocity. The threshold shear velocity of dewatered sand is greater than that of wet sand with the same original moisture content. Our results will provide valuable information about the sand transport of highly saline soil in the desert.     

Identification and establishment of sorting method for isolating CD11b+ myeloid cells in human hepatic metastases from colorectal cancer

AIM: To establish a method for obtaining specific cells in solid tumor tissue by sorting of CD11b⁺ myeloid cells in hepatic metastases from colorectal cancer.METHODS: Tumor tissues were prepared into single cell suspension by mechanical method combined with enzyme digestion, and then the CD11b⁺ myeloid cells were isolated by flow cytometry. The sorted cells were identified by immunocytochemistry. The viability and morphologiy of the sorted cells were evaluated by Giemsa and Typan blue staining. The cell purity was evaluated by flow cytometry.RESULTS: Sufficient numbers of CD11b⁺ cells with high purity were isolated by sorting with flow cytometry from the single cell suspension prepared by mechanical and enzyme digestion. The purity of the cells was confirmed by statistical analysis (P<0.05). The positive rates of the cells before and after sorting were significantly different (P<0.01). The positive cells were verified by immunocytochemical method. Meanwhile, the sorted cells had complete morphology and good activity.CONCLUSION: The CD11b⁺ myeloid cells in solid tumor tissue can be isolated by flow cytometry from the machine-enzyme digestion suspension with high purity, good activity and complete morphology.